77
If any electrical unit in the vehicle is not functioning, check the fuses first. To check and replace them -
• Turn the ignition key to the 'LOCK' position.
• Identify the defective fuse from it’s melted wire i.e. if the silver-colored band inside the fuse is broken or melted.
• Remove blown fuse by hand..
• If fuse blows again, contact service centre for advice. Visit Service centre or call Service centre for advice.
• Install a new fuse of the correct rating.
• Ensure that all other fuses are firmly in position. Spare fuses are provided in the fuse box only.
Caution:
Always replace blown fuse with the same rating as specified, to prevent wiring damage and prevent fire
hazard. Use only specified rating bulb in case of replacement. Usage of higher wattage bulb can cause head
lamp melting & result in blown fuse.
Warning:
Never use a tool that can conduct electricity for removing fuses.
5M. FUSES
*Accessories shown may not be a part of standard fitment.
To Next Page
Loading...
Need help?
General