PanaFlow™ XMT1000 User’s Manual 81
Appendix A. Specifications
Power Supplies
Universal 100-240 VAC 50/60 Hz ±10% or 12 to 28 VDC
Note: For DC-powered meters, Class 2 rated supplies must be used for the line power.
Cable Entries
¾” NPT As-Standard
M20 Via Adapters
Temperature Range
Operating: -40°F to 140°F (-40°C to +60°C)
Storage: -40°F to 158°F (-40°C to 70°C)
Power Consumption
15 Watts maximum
Wiring Connections
Cable entries include 6 × ¾” NPT, consult Panametrics for available adapters
General Installation Conditions
Pollution Degree: 2
Installation Category: 2
Altitude: 2000 m
Ingress Protection: IP66/67
Relative Humidity: 10-90% RH
Data Logging
Storage standard on the meter, up to 10,000 flow data points with up to 25 parameters per data point (requires
PanaView™ Plus software)-
A.3 Drawings
Drawings Description
702-2040 XMT1000 wiring details.
To Next Page
Loading...
Need help?
General