www.bal dormotion.com
Mint Keyword Summary C-5MN1901
Keyword Description
CAPTUREPRETRIGGER -
DURATION
Sets the duration of the pre-trigger phase.
CAPTUREPROGRESS Returns the progress of the pre-trigger or post-trigger
capture phase.
CAPTURESTATUS Returns the progress of the capture.
CAPTURETRIGGER To generate a capture trigger.
CAPTURETRIGGERABSOLUTE To ignore the sign of the trigger value when triggering
from a capture channel source.
CAPTURETRIGGERCHANNEL Sets the channel to be used as the reference source for
triggering.
CAPTURETRIGGERMODE Sets the method used to evaluate the trigger source.
CAPTURETRIGGERSOURCE Sets the reference source to be used for triggering.
CAPTURETRIGGERVALUE Sets the trigger value when triggering from a capture
channel source.
CLEARERRORLOG To clear the error log.
COMMISSIONED To set or read whether the axis/drive has been
commissioned.
COMMS Accesses the reserved comms array.
COMMSINTEGER Accesses the reserved comms array, storing values as
integers.
COMMSMAPMODE To set or read the comms mapping for a comms
element.
COMMSMAPPARAMETER To set or read the associated parameter for a mapped
comms element.
COMMSMODE Selects comms use over either RS485 or CANopen.
CONFIG To set the configuration of an axis for different control
types.
CONNECT To enable a connection between two remote nodes to be
made or broken.
CONNECTSTATUS Returns the status of the connection between this node
and another node.
CONTROLMODE To set or read the control mode.
CURRENTLIMIT To restrict the current output to a defined range.
CURRENTMEAS Reads the measured current.
To Next Page
Loading...
Need help?
General
