Balluff BNI PNT-502-102-Z015 - Establishing device relationship; Assigning device name

Balluff Network Interface ProfiNet™
www.balluff.com
17
5 Integration
Establishing
device
relationship
Navigate through "Target system" -> "Ethernet" -> "Assign device name" to start the tool for
assigning the module a device name.
Assigning device
name
Select the desired name and use "Assign name" to assign the marked device that you
found.
The device name must be the same as that previously configured under device properties
(see previous page).
Identification takes place via the MAC address (on the rear of the device) or via the
Blink Test.