Balluff BNI PNT-502-102-Z015 - General Information; Manual Structure; Typographical Conventions; Symbols and Abbreviations

www.balluff.com
4
1 General
Structure of the
1.1.
manual
This manual is structured such that one chapter is builds on the other.
Chapter 1: General
Chapter 2: Basic safety instructions
…….
Typographical
1.2.
conventions
The following typographical conventions are used in this manual.
Enumerations
Enumeration is shown in the form of lists with bullets.
• Keyword 1
• Keyword 2
Actions
Action instructions are indicated by a preceding triangle. The result of an action is indicated
by an arrow.
 Action instruction 1
 Result of action
 Action instruction 2
Actions can also be indicated as numbers in parentheses.
(1) Step 1
(2) Step 2
(3)
Syntax
Numbers:
Decimal numbers are shown without additional information (e.g., 123),
hexadecimal numbers are shown with the additional indicator hex (e.g., 00
hex
) or the prefix
"0x" (e.g., 0x00).
Cross-references
Cross references indicate where further information on the subject can be found.
Symbols
1.3.
Note
This symbol indicates general notes.
Attention!
This symbol indicates a safety instruction that must be followed without exception.
Abbreviations
1.4.
BNI Balluff Network Interface
EMC Electromagnetic Compatibility
FE Functional ground
I Standard input port
O Standard output port
PNT ProfiNet™
UA Actuator supply undervoltage
US Sensor supply undervoltage
Deviating views
1.5.
Product views and illustrations in this manual may differ from the actual product. They are
intended only as illustrative material.