Balluff BNI PNT-502-102-Z015 - Login and Logout Procedures

Balluff Network Interface ProfiNet™
www.balluff.com
29
7 Webserver
Login/Logout
7.3.
To make configuration settings on the fieldbus module using the web interface, you must
first log in. Functionalities which cannot be used without logging in are indicated by the
grayed out buttons.
The default password is:
BNI PNT-XXX-XXX-XXXX
"BNIPNT“
BNI EIP-XXX-XXX-XXXX
"BNIEIP“
BNI ECT-XXX-XXX-XXXX
"BNIECT“
The password cannot be changed!
After successfully logging in the dialogs are shown as follows:
Use the "Logout" button to log out again. After 5 minutes of no interaction with the
Webserver the user is automatically logged out.
Note
For security reasons the fieldbus module shows only one login at a time with
configuration access. Reading (without logging in) is however possible from multiple
PCs at the same time on the fieldbus module.