Balluff BNI PNT-502-102-Z015 - Ports Dialog and IO-Link Data

www.balluff.com
32
7 Webserver
"Ports" dialog
7.5.
The "Ports" dialog displays information and process data for the connected IO-Link devices.
Select the desired IO-Link Port in the image of the fieldbus module on the right side to see
the device data.
Note
The IO-Link device data are only displayed if the port is also
configured as an IO-Link port!
No appropriate
IODD uploaded
It is possible to read and write the configuration parameters of the IO-Link device via the
"Parameters" option. The parameter indexes and subindexes of the IO-Link device are
described in the corresponding separate user's guide (and follow the IO-Link conventions).
Under "Events" you can see whether a diagnostic event from the IO-Link device exists.
Under "Parameter Server Content" you can view the content of the parameter server if
parameter data is stored on the parameter server.
"Ports" dialog with direct parameter access