• SLMP_ERROR_RESPONSE_DATA_SIZE:
• SLMP_ERROR_REQUEST_DATA_SIZE:
• SLMP_ERROR_CAN_NOT_COMMUNICATION_SETTING:
• SLMP_ERROR_NO_EXIST_PARAMETER_ID:
There may be a newer or older version of the CSP_ file compared with the firmware version.
• SLMP_ERROR_UNDER_EXECUTION:
Another SLMP telegram is currently under execution
• SLMP_ERROR_CAN_NOT_PARAMETER_SET:
It is currently not possible to write parameters, since the start conditions are not met.
Cause: parameters were written simultaneously from more than one Engineering Tool,
or there was an error in the Engineering Tool
• SLMP_ERROR_WRONG_DATA:
The received data are incorrect, such as wrong port number. For example a value is read/
written for port 9 even though no such port exists.
To Next Page
Loading...
Need help?
General
