B&G Network QUAD - Setting the Timers and Lap Timer

28
The Lap Timer can be used to `freeze' the displayed time
with any of the three Timers.
Press the TIMER
key to display the
timers.
Press SETUP key
1 10 min.
2 5 min.
3 Count-up
The display will
flash.
Press ENTER
key, the display is
set to the
selected starting
value. The timer
starts to count.
Press TIMER
key, the display
stops flashing
and the timer is
running.
Press TIMER key
to freeze the
displayed time.
The timer is still
counting but not
displayed
Press TIMER key
4 times to display
the timer again.
SETTING THE TIMERS AND LAP TIMER