EasyManua.ls Logo

Bandit 20XP - Page 43

Bandit 20XP
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bandit
39Copyright 12/17
MODEL 20XP
1. Hydraulic oil lter(s):
Must be replaced after FIRST 10 HOURS OF
OPERATION, USE A 10 MICRON FILTER. After rst
change replace oil lter every 3 months or 400 hours.
2. Grease discharge swivel plates:
Grease swivel plates for discharge as needed.
3. High pressure oil lter(s) (if equipped):
Must be replaced after FIRST 10 HOURS OF
OPERATION. After rst change replace oil lter every
3 months or 400 hours.
3 MONTH MAINTENANCE
MAINTENANCE
1. Hydraulic oil:
Change hydraulic oil and ush the hydraulic reservoir
tank.
2. Hydraulic suction screen(s):
Change hydraulic suction screen(s) yearly or every
2000 hours.
3. Fuel tank:
Drain and clean the fuel tank yearly.
YEARLY MAINTENANCE
1. Pump bearing block:
Pack the female splines of the pump bearing block
every 6 months or every 1000 hours with an EP-2
Lithium type grease. See page 68.
6 MONTH MAINTENANCE

Related product manuals