ADVANCED OPERATION
- You can program your transceiver operating in the setup menu to suit your needs or
preferences.
SET MENU DESCRIPTION
Menu Function/Description Available settings
1 STEP (Frequency step) 5/6.25/10/12.5/20/25kHz
2 SQL (Squelch level) 0-9
3 SAVE (Battery save) OFF/ON
4 TXPR (Transmit power) HIGH/LOW
5 ROGE (Off transmission tone) OFF/ON
6 TOT (Transmission timer) 1min-7min
7 VOX (Voice operated transmission) OFF/1-9
8 BEEP (Keypad beep) OFF/ON
9 VOIC (Voice prompt) OFF/ON
10 TDR (Dual watch) OFF/ON
11
RCODE (Reception Continuous Tone Coded
Squelch)
OFF
12
TCODE (Transmission Continuous Tone Coded
Squelch)
OFF
13 ABR (Display illumination) OFF/ON
14
PTT-ID (Press the PTT button to transmit the
signal code)
OFF/ON
To Next Page
Loading...
