R5900049 /07 ClickShare CSE-80028
Wireless transmission
protocol
IEEE 802.11 a/b/g/n and IEEE 802.15.1
Reach Adjustable with signal strength modulation; max. 30m (100 ft) between
ClickShare Button and ClickShare Base Unit
Frequency band 2.4 GHZ and 5 GHz (DFS channels not supported)
Connections 2x Ethernet LAN
2x USB 2.0; 2x USB 3.0 (back); 2x USB 3.0 (front)
Audio analog line out on mini jack socket (3.5mm), digital S/PDIF
Temperature range Operating: 0°C to +40°C (+32°F to +104°F)
Max: 35°C (95°F) at 3000m
Storage: -20°C to +60°C (-4°F to +140°F)
Humidity Storage: 0 to 90% relative humidity, non-condensing
Operation: 0 to 85% relative humidity, non-condensing
Anti-theft system Kensington lock
Certifications FCC/CE
Warranty 3 years standard
Possible to extend to 5 years
Button
Weight 75 g/0.165 lb
Frequency band 2.4 GHZ and 5 GHz
Wireless transmission
protocol
IEEE 802.11 a/b/g/n
Authentication protocol WPA2-PSK in stand alone mode
WPA2-PSK or IEEE 802.1X in network integration mode
Dimensions (HxWxD) 16.3 mm x 59.3 mm x 162.52 mm / 0.64” x 2.335” x 6.398”
Power consumption Powered over USB
5V DC
350mA Typical
500mA Maximum
2.3 About the Base Unit
Base Unit
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting
room display and the sound of the meeting room's audio system.
The Base Unit can be installed in two different ways.
Front and Top layout of the Base Unit
At the front of the Base Unit you can find a standby button and two USB ports. Status LED is mounted at the
left of the standby button.
CSE-800 Specifications
To Next Page
Loading...
