R5900049 /07 ClickShare CSE-80072
Image 6-19: Audio settings
3. Check or uncheck the check box next to Enable Audio.
Checked: audio is enabled.
Unchecked: audio is disabled.
4. To select the audio output, click on the drop down box and select the desired audio output.
Jack: audio output via jack.
HDMI: audio output via HDMI.
SPDIF: digital audio ouput via TOSLINK
5. Click on Save changes to apply the new settings.
6.10 Display setup, Inputs
About the inputs
When a input source is connected to one of the inputs (HDMI1 or HDMI2), the corresponding Signal led lits up.
The name of the source is displayed next to Source Name but can be changed. This source name is displayed
on the screen. Each input can be enabled or disabled.
How to change the source name
1. Log in to the Configurator.
2. Click Display & Audio → Inputs.
CSE-800 Configurator
To Next Page
Loading...
