Barco ClickShare CSE-800 - About the CSE-800

R5900049 /07 ClickShare CSE-80030
LEDs behavior Explanation
red blinking • an error occurred
dark • deep standby/off
Standby button
The button at the front of the Base Unit has a standby function once the Base unit is powered
• When the system is in normal operational mode, a push makes the system goes to a pre-defined standby
mode.
• When the system is in a standby mode, a push triggers the system to start up and to go to normal
operational mode.
Back layout of the Base Unit
The connection panel is situated at the back of the Base unit.
1
2
3a
4
6
5
3b
7
9
8
10
11
12
13
3b
14
15
3a
Image 2-3
1 Rocker switch
2 Power connection
3a Fixture point for antenna WiFi 1
3b Fixture point for antenna WiFi 2
4 Reset
5 HDMI out 1 connector
6 HDMI out 2 connector
7 LAN 1 connector (primary LAN interface)
8 LAN 2 connector (secondary LAN interface)
9 USB connectors 3.0
10 USB connectors 2.0
11 Audio connectors
12 Audio connectors
CSE-800 Specifications