R5900049 /07 ClickShare CSE-80074
Image 6-21: WiFi settings
IP address & subnet mask
1. Log in to the Configurator.
2. Click Wi-Fi & Network → WiFi Settings.
3. To change the IP address or subnet mask, click in the input field and enter the 4 octets of the new IP address
or subnet mask.
Note: This must NOT be 0.0.0.0 for static IP-Address assignment.
WiFi Mode and channel selection
1. Select the wireless connection mode by clicking on the drop down box and selecting the desired mode.
The following modes are possible:
• Concurrent
• 2.4 GHz only
• 5 GHz only
Depending on the selection the bottom pane will change. When Concurrent is selected, the panes for 2.4 GHz
and 5 GHz are available each with the SSID and the MAC address. When typical frequency is selected, only
that pane will be available, the other one is blanked out.
2. Select the channel for the selected frequency. Click on the drop down box and selecting the correct band. If
Concurrent is selected you have to select the channel for each frequency.
CSE-800 Configurator
To Next Page
Loading...
