28 CLM W6
4. User Controls
4.1 On-Screen Display Menus
4. USER CONTROLS
The projector has multilingual On-Screen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
4.1.1 Using the OSD Menus
Press the MENU button on the remote control or on the back of
the projector to open the OSD menu.
When the OSD displays, use the arrow keys to navigate in the
menu and enter to a desired item.
Use the UP/DOWN buttons to select the desired item in the
submenu and adjust the settings with the LEFT/RIGHT buttons
or press ENTER to go to another submenu.
Select the next item that you want to adjust in the submenu and
adjust it as described above. When each item is adjusted, the
projector saves the new setting.
Press MENU to return to the previous menu.
To exit the OSD menu, press MENU again.
1.
2.
3.
4.
5.
6.
Main Menu
SettingSubmenu Another Submenu
To Next Page
Loading...
Need help?
General
