Barco CLM W6 - Control Menu

41CLM W6
4. User Controls
4.1.7 Control Menu
IR Address
Set IR address of the remote. The address of the remote control is
changed by pressing the ADDRESS and arrow buttons together to select
IR address 1/2/3/4. The remote control LED indicator will blink twice to
conrm the new remote control address.
Custom 1:
Press ADDRESS and UP buttons together for
IR address 1.
The remote control LED indicator will blink twice
to conrm the new remote control address.
Custom 2:
Press ADDRESS and RIGHT buttons together
for IR address 2.
The remote control LED indicator will blink twice
to conrm the new remote control address.
Custom 3:
Press ADDRESS and DOWN buttons together
for IR address 3.
The remote control LED indicator will blink twice
to conrm the new remote control address.
Custom 4:
Press ADDRESS and LEFT buttons together for
IR address 4.
The remote control LED indicator will blink twice
to conrm the new remote control address.

-
-

-
-

-
-

-
-
Custom 1 Custom 2 Custom 3 Custom 4
LED Indicator