9CLM W6
1. Safety
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning. Never use strong
solvents, such as thinner or benzine, or abrasive cleaners, since these will dam-
age the cabinet. Stubborn stains may be removed with a cloth lightly dampened
with mild detergent solution.
To ensure the highest optical performance and resolution, the projection lenses
are specially treated with an anti-reective coating, therefore, avoid touching the
lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth,
detergent solution, or thinner.
Never use the projector when not all lamps are installed.
Horizontal and vertical projector tilt ranges: The projector is designed to
work in a table or ceiling mounted position, but tilting is allowed. Side to side tilt,
however, must not exceed +/- 20°. This limit ensures that the lamp in the projec-
tor operates properly and safely.
A: Tilting allowed without problems
B: No tilting allowed in this area
-
-
B
B
AA
20°
20°
20°
20°
B
B
AA
20°
20°
20°
20°
Front View Side View
To Next Page
Loading...
Need help?
General
