Barco NIO 5MP - Display Controller Information; Minimum System Requirements; BarcoMed Nio Controller Features; Supported Display Controller Resolutions

To Next Page

To Previous Page

Introduction

System manual Nio 5MP 17

• Hardware cursor

•Single slot PCI card

• Displays VGA boot messages on Nio displays.

Supported Resolutions For Each Head of the

BarcoMed Nio display controller

For BarcoMed Nio 2MP

•1200 x 1600 @ 60 HZ (primary)

•1600 x 1200 @ 60 Hz

For BarcoMed Nio 3MP

•1536 x 2048 @ 60 HZ (primary)

•2048 x 1536 @ 60 Hz

For BarcoMed Nio 5MP

•2048 x 2560 @ 60 HZ (primary)

•2560 x 2048 @ 60 Hz

For all BarcoMed Nio display controllers

The following resolution is also available when the OS

is booted in VGA mode.

•640x480 @ Default Refresh Rate, 16 colors

System Configuration Guidelines

Because of the low power consumption and low heat

generation of the BarcoMed Nio display controller,

multiple controllers may be installed in adjacent PCI

slots or adjacent to other PCI boards. Additionally there

should be no need to modify either the PC’s power

supply and/or cooling system.

Other manuals for Barco NIO 5MP