Barco NIO 5MP - Page 50

Software installation
50 System manual Nio 5MP
Figure 26
Driver installation
6. Click “Next” on the Display Driver Wizard’s Welcome
Screen to continue or “Cancel” to exit the Display
Driver Wizard and return to the Software Install
Wizard.
The Device Selection Screen’s dialog box should
show only those devices physically installed and
supported by the BarcoMed display controller driver
on your BarcoMed Software CD. If there are no
BarcoMed devices installed, or if Windows does not
recognize the installed devices, or if the driver on
your BarcoMed Software CD does not support the
installed devices, the dialog box will be empty, and
the BarcoMed driver wizard will exit when the user
clicks “Finish” or “Cancel”. Select the device you
want to install and then click “Next”.
Caution: You can install the driver for only one type
of BarcoMed device at a time. If you have multiple
types of BarcoMed devices installed in your computer,