EasyManua.ls Logo

Barco PH series - Color Enhancer

Barco PH series
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Adjustments with the ADVANCED menu
How to select
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the or key.
3. Select your desired color temp erature by pressing the or key.
4. To cancel the m enu, press the MENU key.
To customize the color temperature
1. Select COLOR TEMP. in the IMAGE men u.
2. Press the or key to select USER
.
3. Press the ENTER key.
4. Press the or key to select the desired item.
COLOR TEMP. –USER
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R
0
BRIGHTNESS G
0
BRIGHTNESS B
0
0
0
0
Image 6-1
5. Press the or key to adjust t he selected item.
6. Repeat s tep 4 and step 5 for optimum adjustment results.
7. To cancel the m enu, press the MENU key.
Enabling stored user color temperature
1. Set COLOR TEMP. to US ER in the IMAGE menu.
About color temperature
Color temperature is a way to show the differences in white. White of which tempe
rature is low appears reddish. When the color
temperature rises, w hite appears bluish. For example, you can change the color temperature using the following procedures.
To raise the color temperature: Increase the CONTRAS T B (blue) and decrease the CONT RA ST R (red).
To r educe the color temperature: Decrease the CONTRA ST B (blue) and increase the CONTRAS T R (red).
If you set all of CONTRA ST R , G, and B to n egative values, t he original brightness of the image can’t be obtained ev en when you
maximize CONTR AS T in the IM AG E menu.
6.5 Color Enhancer
With the IMAGE menu
1. Display the IMAGE menu.
2. Select COLOR EN HANCER by pressing the or key.
COLOR ENHANCER
AUTO
Image 6-2
3. Select USER or MULTI-SCR EEN by pressing the or key.
10
3
COLOR ENHANCER –USER
GAMMA MODE DYNAMIC
BrilliantColor
TM
DYNAMIC
CONTRAST
Image 6-3
2.0
BrilliantColor
TM
0
COLOR ENHANCER –MULTI-SCREEN
GAMMA MODE
Image 6-4
Important: You c an s et MULTI-SCREEN only when EDGE BLEN DING is ON or COLO R MATCHING is M ANUAL or M EASURE
in the MULTI-SCREEN m enu.
4. Press the ENTER key.
The detailed menu for the color e nhancer is displayed.
56
R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals

Table of Contents

Related product manuals