8. Lamp relay
→ When you select 1H/24H or 2H/1W , the box to se t the lamp re lay interval is d isplayed.
→ When the projector is turned off, the setting is cleared and the projector resumes operation from the time of the power-on or
menu setting shown in the preceding step.
1H/24H
23H
0
OK
CLEAR
DEL
CANCEL
123456 78 9
← →
NEXT LAMP RELAY
Image 8-6
2H/1W
0
OK
CLEAR
DEL
CANCEL
123456 78 9
← →
6D 22H
NEXT LAMP RELAY
Image 8-7
9. Move the key cursor using the direction keys to select the number you want to enter and then press the ENTER key.
→ Maximum interval
1H/24H
23H (23 hours)
2H/1W
6D 22H (6 days and 22 hours)
← key Shifting the p osition of enter cursor to the left for each c haracter.
→ key Shifting the position of enter cursor to the right for each c haracter.
DEL k ey Deleting the character in the position of enter cursor for each character.
CLEAR ke y Deleting all the entered c haracters.
→ W hen the value you e ntered meets the following conditions, an error dialog box is displayed at the s creen center.
- The value has been cleared by DEL or CLE AR and left blank.
- The value yo u entered is out of the setting range.
1H/24H
24H or over
2H/1W
6D 23H or over
→ The value of each item is out of the setting range.
D
7orover(2H/1W
only)
H24orover
10.When select ing OK, the setting is com pleted as the lamp-switching interval stored. However, when selecting CANCEL,thesetting
is completed without storing.
→ The display r eturns the LAMP RELAY menu after selecting OK or CANCEL.
→ The setting y ou made is applied to NEXT LAMP RE LAY in t he INFORM ATION menu.
Important
• When you use the projector continuously, the lamp relay may n ot be performed on time d ue to errors of the clock function.
• Immediately after the power-on, during the lamp selection, or during the lamp r elay operation, you cannot change the s etting
of LA MP SELECT and LAMP RELAY.
• In the case of continuous projection, the lam ps may deteriorate earlier unles s they are turned off for 1 hour per w eek.
• When using this projector continuously for a long time o f period, enable LAMP RELAY.
• The brightness and color tint vary at the time of lamp switching.
82
R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
