Bard Site-Rite 5 - 5­ Settings; Date, Time and Image Size; Image Parameters

27
Instructions For Use
5 Settings
5.1 Date, Time and Image Size
To modify date, time and image size settings:
1. Press the Freeze button ( ) to pause the system.
2. Press and hold the Depth button (
cm) to enter the time/image size mode. The year field will
then be highlighted.
Release the Depth button.
3. Press the Depth button (
cm) to select the desired date or time field to be modified.
4. Press the Gain buttons ( , ) to change the selected date or time values.
5. After setting the date and time, press the Depth button (
cm) to enter the image size fields.
The current image size will be highlighted.
6. Press the Gain buttons ( , ) to select the desired image size.
7. Press the Freeze button ( ) to store the updated settings and resume normal operation.
5.2 Image Parameters
The Site~Rite 5 image may be changed from the factory default settings to a higher contrast image setting.
1. To change contrast settings, press and hold the Depth Marker Indicator (/:\) for five seconds.
Note: The image will switch between image settings.
2. To return the Site~Rite 5 image to the original setting, press and hold the Depth Marker
Indicator for five seconds.