#8 Voice
#9 Answer
When Program Code 2 is selected the B1290 responds with the prompt:
B1290: Enter Directory
YOU:
1** Directory A
2** Directory B
3** Directory C
4** Directory D
0** Help (speaks a summary of commands)
#** Quit
If one of the directories is selected a typical response would be:
B1290: Directory A, Line One is DIAL 2559544 WAIT 3 SEC VOICE
Thisisthecommandsequenceinthefirstlineofthedirectoryandwouldre-
sult in the B1290 dialing the number 2559544, waiting for 3 seconds and
then speaking the voice messages. At this time the following options are
available:
2** Change this line
3** Delete this line
4** Insert a new line before the current line
#** Quit
** Next
YOU:
2** Change this line
B1290: ‘beep’
To change the line, a complete sequence of commands and values must be
entered. For example, if the setting was to be changed so that the wait time
was 5 seconds instead of 3, the entry would be:
YOU:
#0 2559544 #25 #8 **
B1290: Directory A, Line One is DIAL 2559544 WAIT 5 SEC VOICE
Which is the same as [DIAL]2559544 [WAIT]5 [VOICE] for this line in the
PC programming software.
For an invalid entry, the B1290 will speak the word “Error” at the end.
32 Program Codes
To Next Page
Loading...