Barnett Engineering ProTalk Plus B1290 - Operating a Radio

B1290: Relay Timer is seconds
YOU:
1** Select minutes for the timebase
B1290: Relay Timer is minutes
YOU:
** Next
B1290: Relay One On Timer is 00 minutes
YOU:
10** Select 10 minutes for the time
B1290: Relay One On is 10 minutes
YOU:
** Next
B1290: Relay Two On timer is 00 minutes
At this time you are finished programming and can hang up the phone.
When the B1290 calls you with an alarm, the sequence will be as follows:
B1290: Ajax Compressor Station; High Pressure.
Enter Acknowledge Code
YOU:
555* Send the Relay On Code
Ajax Compressor Station;
Bypass Valve On (and Alarm - Enter Acknowledge Code).
YOU:
1234 Send the Acknowledge Code
B1290: Ajax Compressor Station;
Alarms Acknowledged
Example 5: Operating a Radio Pager
In this example, when an alarm is received you want to contact the person
on call, who is carrying a two-tone radio pager which operates on the com
-
pany’s private radio system. If the person does not call back to acknowl
-
edge the alarm, you want the B1290 to start dialing telephone numbers.
B1290: Enter Program Code
YOU:
2** Directory Code
B1290: Enter Directory
YOU:
1** Directory A
B1290: Directory A, Line One is...
YOU:
2** Change
B1290: ‘beep’
57 Programming Examples