Barnett Engineering ProTalk Plus B1290 - Dialing from Two Different Telephone Directories

Example 2: Dialing from Two Different Telephone Directories
Inthis example,the B1290isprogrammed totelephone whoeverison callif
there is an alarm. The company has two groups of employees which take
turns being on call alternate weeks. Instead of reprogramming the B1290
directory every week, two directories are programmed. When the Direc
-
tory Control Code is received, the B1290 is directed to dial from the other
directory. The directory may be switched with the Directory Control Code
overthetelephone,localprogramming phone, ortwo-way radio. There are
specificrulesgoverninghow thealarmscanbeassignedto directories ifthe
Directory Change Code is used. Refer to Program Code 2 Directories for
moreinformationconcerningtheserules. Thisexamplestartsbysettingthe
telephone numbers in the two directories.
B1290: Enter Program Code
YOU:
2** Directory Code
B1290: Enter Directory
YOU:
1** Directory A
B1290: Directory A, Line One is...
YOU:
2** Change
B1290: ‘beep’
YOU:
#0 2559544 #8 **
[DIAL]2559544 [VOICE]
B1290: Directory A, Line One is DIAL 2559544 VOICE
YOU:
** Next
B1290: Directory A, Line Two is...
YOU:
2** Change
B1290: ‘beep’
YOU:
#0 2559598 #8 **
[DIAL]2559598 [VOICE]
B1290: Directory A, Line Two is DIAL 2559598 VOICE
YOU:
** Next
B1290: Directory A, Line Three is...
YOU:
#** Quit
B1290: Enter Directory
YOU:
2** Select Directory B
B1290: Directory B, Line One is...
52 Programming Examples