Barnett Engineering ProTalk Plus B1290 - Dialing a Paging Terminal

YOU: #1 #4 08555*14334 #8 **
[RADIO][2TONE]855.5/1433.4 [VOICE]
B1290: Directory A, Line One is RADIO 2 TONE 855.5 Hz 1433.4 Hz
VOICE
YOU:
** Next
B1290: Directory A, Line Two is...
YOU:
2** Change
B1290: ‘beep’
YOU:
#0 2559544 #8 **
B1290: Directory A, Line Two is DIAL 2559544 VOICE
YOU:
** Next
B1290: Directory A, Line Three...
You are finished programming and may hang up the phone.
Example 6: Dialing a Paging Terminal
In this example, rather than using a private radio system, the company’s
employees utilize a city-wide paging service. Normally when you dial the
paging terminal, you are prompted to enter your own telephone number.
Your number is then displayed on the digital read-out of the pager, so the
pagedparty knowswhat numberto callback. Weare goingto programthe
B1290 to call this paging terminal when it reports an alarm.
B1290: Enter Program Code
YOU:
2** Directories
B1290: Enter Directory
YOU:
1** Directory A
B1290: Directory A, Line One is...
YOU:
2** Change
B1290: ‘beep’
YOU:
#0 2559544 #24 #7734 **
[DIAL]2559544 [WAIT]4 [DTMF]734
B1290: Directory A Line One is DIAL 2559544 WAIT 4 seconds
DTMF 734
YOU:
** Next
You are finished programming and may hang up the phone.
58 Programming Examples