3. Operation Codes
These parameters control how the unit operates. When one of these codes
is received, the B1290 performs the required function.
Acknowledge Code (Program Code 3.1)
Access Code (Program Code 3.2)
Interrogate Code (Program Code 3.6)
Remote Alarm Input Code (Program Code 3.5)
Directory Control Code (Program Code 3.7)
4. Relay Control
Theparameters requiredtocontrol arelayare listedhere. Youmay use any
number of relays, but the ON/OFF input codes, voice message and relay
ONtimemustbeprogrammedforeachrelayused. Therelayvoicecodeen
-
ables or disables the voice confirmation for all relays.
Relay ON/OFF Control Codes (Program Code 3.3)
Record Relay Voices (Program Code 1.2)
Relay Timer Timebase (Program Code 5.3)
Relay On Time (Program Code 5.3)
Relay Voice (Program Code 6)
Relay Special Functions (Program Code 5.3)
5. Telephone Specific Parameters
This section describes the parameters used when the unit is required to
transmit alarms or signaling over the telephone system.
Using Directory (Program Code 5.2)
Directory Telephone Numbers (Program Code 2)
Access Code (Program Code 3.2)
Rings Before Answering (Program Code 4)
Dial Format (Program Code 6)
6. Radio Specific Parameters
These parameterscontrol the operationof the unitwhen it isconnected to a
two-wayradio. RefertotheinstallationsectioninGettingStartedforthere
-
quired connections to the radio.
Using Directory (Program Code 5.2)
Directory Radio Command (Program Code 2)
46 Programming Reference
To Next Page
Loading...