Barnett Engineering ProTalk Plus B1290 - Appendix C - Programming Tree

Appendix C - Programming Tree
The parameters used to program the ProTalk Plus are given as a summary be
-
low. Where
X appears, user data is entered
1** Voices 1** Alarms 2** Record
** Next
#** Quit
2** Relays 2** Record
** Next
#** Quit
3** Erase #31** Erase
2** Directory 1** Dir A 2** Change Line
#0X [DIAL]...
#1 [RADIO]
#2X [WAIT]...
#3 [ALERT]
#4X [2 TONE] ...
#5X [5 TONE] ...
#6X [1 TONE] ...
#7X [DTMF] ...
#8 [VOICE]
#9 [ANSWER]
3** Erase Line
4** Insert Line
** Next
#** Quit
2** Dir B - Same as Directory A
3** Dir C - Same as Directory A
4** Dir D - Same as Directory A
76 Appendix C - Programming Tree