B1290: Enter Directory
YOU:
1** Directory A
B1290: Directory A, Line One is...
YOU:
2** Change
B1290: ‘beep’
YOU:
#1 #3 #8 #8
[RADIO][ALERT][VOICE][VOICE]
B1290: Directory A, Line One is RADIO ALERT VOICE VOICE
YOU:
** Next
B1290: Directory A, Line Two is..
YOU:
#** Quit
B1290: Enter Directory
YOU:
#** Quit
Now remove the acknowledge request prompt.
B1290: Enter Program Code
YOU:
6**
B1290: Dial Format is Zero
YOU:
** Next
B1290: Squelch is 0
YOU:
** Next
B1290: Relay voice is On
YOU:
** Next
B1290: Acknowledge Voice is On
YOU:
0**
B1290: Acknowledge Voice is Off
YOU:
** Next
B1290: Dial Tone is on
At this point you are finished programming and may hang up.
YOU:
** Next
61 Programming Examples
To Next Page
Loading...