B1290: Enter Program Code
YOU:
7** Expanders
B1290: Expander Number is 0
YOU:
1** Enter 1 for the number of expanders
B1290: Expander Number is One
YOU:
** Next
B1290: Expander Site Voice is 0 (default is not to announce the
expander ID)
YOU:
** Next
B1290: Enter Program Code
YOU:
11** Expander 1, Voices
B1290: Enter Voice Code
YOU:
1** Record Alarm Voices
B1290: Expander One Site is...
YOU:
** Next (Site ID is disabled - don’t need a voice message)
B1290: Expander One, Alarm One is...
YOU:
2** Change this voice
B1290: beep-beep
YOU: Intrusion
B1290: Expander One, Alarm One is Intrusion
YOU:
** Next
B1290: Expander One Alarm Two is...
YOU:
2** Change this voice
B1290: beep-beep
YOU: High Temperature
B1290: Expander One, Alarm Two is High Temperature
YOU:
** Next
B1290: Expander One, Alarm Three is...
Continue programming in the normal fashion, remembering to enter the
number of the expander before the Program Code. Only the voices MUST
64 Programming Examples
To Next Page
Loading...