41 Tone - send a single tone
4Alert - send a beeping tone
4DTMF - send a string of digits
4Answer - monitor the call progress sign-
als and wait for the called party to speak
before announcing the alarm message.
Access Code Password for dial-up access to program-
ming:1 to 8 digits
Acknowledge Request The acknowledge request at the end of the
alarm annunciation can be disabled for use
with public address systems.
Number of Rings Sets the number of rings before the B1290
will answer the line: 1 to 8 rings or never.
Squelch Polarity Sets the radio busy monitor to either high
or low when busy.
Relay Voices Voice messages that are returned when a
relay is operated.
Disable Relay Voices Relay voices are not spoken.
Relay On/Off Codes DTMF codes that turn the relay on and off.
Independent for each relay: 1 to 8 digits
Relay Timer Makes the relay a timed type where it will
remain on for the specified time after the
On code is received. Range is 1 to 199 in
either seconds or minutes
Relay Special Function These automatic functions can be assigned
to the relays:
4Relay 1: New (unacked) alarm on
4Relay 2: Any alarm on
4Relay 3: Alarm acknowledged (timed)
4Relay 4: Error
Pulse Dial Forces dialing to be pulse instead of tone.
Number of Expanders Sets the number of connected expanders.
Disable Expander ID Stops the site ID in the expander from be-
ing spoken.
Audio Levels Sets the gain for audio signals in the B1290
74 Appendix A - Programmable Features
To Next Page
Loading...