A: R104GB11A.PMD
B: R104DE11A.PMD
E: 010404 / TCS
G: 150404 / T. Wenger
Section 11
Page 6
Service pages
Select to save the changes
and
to retain the previous values.
Lock areas 1-5 are saved with the user
program. The lock areas are therefore also
loaded whenever the program is reloaded. Lock
areas 6 – 10 are reserved exclusively for
Battenfeld service engineers and are therefore
also saved together with the service data.
Should you forget to press the ”OK” button you
are asked to confirm the values before you
switch to another page or lock area.
To Next Page
Loading...
