A: R104GB11A.PMD
B: R104DE11A.PMD
E: 010404 / TCS
G: 150404 / T. Wenger
Section 11
Page 12
Service pages
Configuration of the
Peripheral interface
R10B4_129.BMP
Select to switch to the periphery status
page and then select SERVICE
on the
MCD to switch to the periphery configuration
page.
The number of peripheral inputs and outputs
may only be changed by Battenfeld Service
engineers.
Here you can change the labels on the digital
peripheral inputs and outputs as well as the
digital input type (User level 20 or higher is
required here).
To Next Page
Loading...
