A: R104GB08A.PMD
B: R104DE08A.PMD
E: 310304 / TCS
G: 140404 / T. Wenger
Section 8
Page 2
Palletising program
Palletising program commands
R10B4_113.BMP
PalProg PROGRAM NAME
START
This command starts the selected palletising
program.
Definition: The system moves to the next
position following the specified movement
sequence.
PalProg PROGRAM NAME
RESET
All counters are zeroed.
This can also be done from the Palletising
status page. (Used in conjunction with IF
commands)
To Next Page
Loading...
