Service pages
A: R104GB11A.PMD
B: R104DE11A.PMD
E: 010404 / TCS
G: 150404 / T. Wenger
Section 11
Page 13
Digital input types
1 Standard digital input
2 So-called ”latch” input. Some inputs
open and close rapidly (pulse, button). If
this input is scanned in the program
Type 1 only shows the current status.
The input status is saved if it is changed
at some time during the Automatic cycle
and reset when it is read off.
This can, for example, be used when the
production is terminated manually.
To Next Page
Loading...
