A: R104GB00A.PMD
B:R104DE00A.PMD
E: 290304 / TCS
G: 130404 / T. Wenger
Section 0
Page 14
Operation and Control System
Alphanumeric entries for various editors
(e.g. CNC editor)
This keypad appears when several lines of data
can be entered such as in the CNC editor or
notepad.
This keypad has basically the same functions
as the previously described alphanumeric
keypad.
1
R10B4_024.BMP
It has an additional navigation pad on the right
(1) which is used to position the Editor cursor as
required. (left, right, up, down, start, end)
Select DEL to delete the entry.
Select INS to select either ”Insert” or
”Overwrite”.
To Next Page
Loading...
