A: R104GB01A.PMD
B: R104DE01A.PMD
E: 290304 / TCS
G: 140404 / T. Wenger
Section 1
Page 4
Menu pages - General
Units
You can specify which units are to be used by
selecting either
millimetres or inches.
Start Touch calibration
If you have problems entering alphanumeric
data or generally have problems using the touch
screen, e.g. you wish to enter ”A” but ”S” is in
the box instead ((A is next to S on the keyboard).
you can calibrate the display here.
It is usually necessary to carry out a Touch
calibration when a new user logs in.
LOGOUT
Here you can program the system to log you out
automatically after a set period of time, i.e. the
system switches to User change 90 after the
specified time. If ”0” is entered the current user
remains logged in. This time can be changed
from User level 20 upwards.
Operating hours counter
The robot system operating hours are displayed
here.
To Next Page
Loading...
