2.3 Maintenance Hazards
Before servicing, park machine on a rm and
level surface, lower lift arms, engage park brake,
remove key and place a “Do Not Operate” tag on
control panel. Read and understand this manual.
If you do not understand any part of the manual,
contact your Baumalight dealer.
Always wear face and/or eye protection, safety
shoes, and other protective equipment appropriate
for the job.
Do not make unauthorized modications. Contact
your Baumalight dealer before you weld, cut/drill
holes, or make any other modications.
Always use Baumalight replacement parts.
^ WARNING
Moving parts can crush and cut.
Keep clear of moving components.
Follow lockout procedure before
servicing.
^ WARNING
Entanglement hazard.
Keep clear of moving components.
Wear proper protective equipment
appropriate for the job.
^ WARNING
Prevent death or serious injury.
Before performing inspections, service
or maintenance:
• Park machine on rm, level surface.
• Lower lift arms to ground.
• Engage park brake.
• Turn engine off and remove key.
• Place “Do Not Operate” tag on
control panel.
^ WARNING
Burn hazard.
Hot and high pressure hydraulic oil.
Allow oil to cool before servicing.
^ WARNING
Crushing hazard.
Raised unsupported lift arms can fall,
resulting in death or serious injury.
Never enter the area under raised lift
arms.
17
To Next Page
Loading...
