Baumalight TRL620D - As Required; Check Battery

5.8 As Required
Check Battery
Check battery as needed. Keep battery clean and
terminals free of corrosion.
^ WARNING
Batteries, battery posts, battery
terminals, and related accessories can
expose you to chemicals including lead
and lead compounds, which are known
to the State of California to cause cancer
and birth defects or other reproductive
harm.
For more information go to www.
P65Warnings.ca.gov.
1. Raise lift arms and install lift arm lock. See Lift
Arm Lock in Section 4.8.
2. Remove cover (A) to access battery (B).
A
B
3. Loosen and remove negative (-) battery cable
clamp.
4. Loosen and remove positive (+) battery cable
clamp.
5. Clean cable clamps and terminals.
6. Check cables for wear, damage or corrosion.
Replace cables if necessary.
7. Connect positive (+) battery cable clamp.
8. Connect negative (-) battery cable clamp.
9. Verify battery tie downs are tight.
10. Install cover (A).
48