3. Select the T
menu by turning the button.
For heating circuits 2 and 3, select the parameters T
or T
.
For the domestic hot water circuit, select the parameter T
.
4. Confirm the menu selection by pressing the button
.
The parameter S
(500, 520, 540 or 560) is displayed.
5. Confirm the menu selection by pressing the button
.
The current selection flashes.
6. Select a weekly interval.
Table 1, page 98.
7. Confirm the menu selection by pressing the button
.
8. Select the parameter 1
(501, 521, 541 or 561) by turning
the
button.
Fig.
119
MW-3000071-EN-02
MENU
---------------------------------------------------
Information
Set time and date
Fig.
120
MW-3000133-EN-02
MENU
Mon - Sun
Time central heatin
CH1
Select da
s
Fig.
121
MW-3000134-EN-02
MENU
06:00
Time central heatin
CH1
Mon - Sun: 1st Time ON
9 Settings
7609474 - v02 - 04092014 101
To Next Page
Loading...
Need help?
General
