Baxi POWER HT+ Series - Selecting a Heating Circuit

2. Select the C
Controller stop function
parameter by turning the but
ton.
3. Press the
button to confirm.
Controller stop function
O
On
is displayed.
4. Press the
button to confirm.
304:Controller stop
is displayed.
5. Press the
button to modify the thermal output value from 0 to
100% by turning the
button.
6. Press the
button to confirm the thermal output.
Note
Press the
MENU
key to return to the main display and reactivate the
control system.
9.2.11 Selecting a heating circuit
The control panel can manage up to three different heating circuits.
Fig.
103
MW-3000086-EN-02
MENU
---------------------------------------------------
-
Chimne
y
swee
p
function
Controller sto
p
function
Fig.
104
MW-3000087-EN-02
MENU
Chimne
y
swee
p
function
Controller sto
p
function
Manual control
Fig.
105
MW-3000088-EN-02
MENU
Controller sto
p
function
On
Fig.
106
MW-3000089-EN-02
MENU
80%Ad
j
ust?
304:Controller sto
p
function
Controller sto
p
set
p
oin
t
0% 100%
9 Settings
7609474 - v02 - 04092014 95