Baxi POWER HT+ Series User Manual

10. Close the vent valve, using the plug.
11. Refit the magnetic ring.
12. Refit the insulation on the low-loss header.
13. Refit the two side panels on the low-loss header kit.
14. Ensure the two side panels are securely seated by pressing firmly on
them.
Fig.184
MW-4000305-1
10
Fig.185
MW-4000306-1
12
11
Fig.186
MW-4000307 -1
13
14
11 Maintenance
122 POWER HT + 7702630 - v02 - 11082018

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic