57
• Resume From S3 By PS/2 Mouse
This setting determines whether the system will be awakened from what power saving modes when
input signal of the PS/2 mouse is detected.
• Resume By PCI Device (PME#)
When set to [Enabled], the feature allows your system to be awakened from the power saving modes
through any event on PME (Power Management Event).
• Resume By PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the power saving modes
through any event on PCI Express device.
• Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the system on a scheduled time/date.
To Next Page
Loading...
