BD FACSCelesta Flow Cytometer - Page 42

BD FACSCelesta Flow Cytometer User’s Guide42
Base configurations Each BD FACSCelesta flow cytometer has a base cytometer
configuration that corresponds to the layout of the installed lasers
and optics in your cytometer. This base configuration is set by your
field service engineer.
BD FACSDiva
cytometer
configuration
Before you acquire data using BD FACSDiva software, you must
specify a cytometer configuration. The cytometer configuration
defines which filters and mirrors are installed at each detector.
BD FACSDiva software provides a BD base configuration for your
BD
FACSCelesta flow cytometer. Select Cytometer >
View
Configuration to create, modify, or delete custom cytometer
configurations. (See the Cytometer and Acquisition Controls
chapter of the BD
FACSDiva Software Reference Manual for
details.)
More information • About the configuration (page 132)