Chapter 3: Cytometer setup 43
Custom configurations and baselines
Introduction This topic describes where to find information on how to create a
custom configuration and define a baseline for a performance
check.
Overview BD Cytometer Setup and Tracking (CS&T) software is used to
define the baseline performance of your cytometer. A baseline
provides a starting point for the tracking of cytometer
performance. When running a performance check, you compare
the results to the baseline.
See Optimizing cytometer settings (page 61). Please see the latest
published filter guides available on our website
(
bdbiosciences.com) for more information.
See the BD Cytometer Setup and Tracking Application Guide for
information on creating custom configurations and defining a
baseline.
More information • Running a performance check (page 67)
To Next Page
Loading...
