Chapter 5: Optimizing cytometer settings 63
Note: Application settings are optional and do not have to be
saved for the experiments. However, they are useful for optimizing
cytometer settings.
About the
examples
The examples in this chapter use a 4-color bead sample with the
following fluorochromes:
•FITC
•PE
• PerCP-Cy™5.5
•APC
If you follow this workflow with a different bead sample (or
another sample type), your software views, data plots, and
statistics might differ from the example. Additionally, you might
need to modify some of the instructions in the procedure.
The information shown in italics is for example only. You can
substitute your own names for folders and experiments.
4 Creating application settings (page 77)
5 Recording compensation controls (page 80)
6 Calculating compensation (page 83)
Step Description
To Next Page
Loading...
