BEA IXIO-ST - Sensor Setup Procedures; Quick Setup Method; Assisted Setup Method

+
+
+
2 s
4 s
4
75.5782.08 IXIO-ST 20230913 Page 7 of 12
SETUP
Set up the sensor using either push-buttons or the remote control.
TEST THE PROPER OPERATION OF THE INSTALLATION BEFORE LEAVING THE PREMISES!
SETUP 1 QUICK
SETUP 2 ASSISTED
test of full door cycle + reference picture
either hold the knob for 2 seconds, or use the remote
control buttons as specified
either hold the knob for 4 seconds, or use the remote
control buttons as specified
STEP OUT OF THE INFRARED FIELD!
LED flashes red-green