BEA LZR-MICROSCAN T - OVERVIEW OF SETTINGS (cont.); Menu 3 (DIAGNOSTICS)

75.5753.15 LZR-MICROSCAN T 20180720 Page 11 of 1675.5753.15 LZR-MICROSCAN T 20180720 Page 11 of 16
NOTES:
4. Display Door (DispDoor): Displays current position / state of doors. 5. Display Sensor (DispSens): Displays which device(s) are active. 6. Display Position (DispPos): Displays opening position (0% = full closed, 100% = full open relative to teach-in open cycle. 7. If experiencing issues, reset error log and review at a later time for possible new error(s) to help solve the issue.
OVERVIEW OF SETTINGS (cont.)
MENU
ConfiLCD
DISPLAY
PARAMETERS DESCRIPTION
Menu 3 (DIAGNOSTICS)
DispDoor
4
Closed
Opening
Open
Closing
NotClosed
Manual
HoldOpen
Off
AdvanceSafe
Displays current position/state of door
DispSens
5
A1 A2
PP
MO
S1
S2
HM
Displays active devices
A1: Approach microscan T 1 MO: Motion Sensor S2: Safety microscan T 2 A2: Approach microscan T 2 S1: Safety microscan T 1 HM: Home Switch Closed PP: Push Plate
DispPos
6
% % Displays opening position (0% = full closed, 100% = full open relative to learn cycle)
ID# ......................
Config ......................
Software ......................
ErrorLog ......................
ZIP ......................
HubTemp ......................
PowerSupply ......................
OperatingTime ......................
ResetLog
7
......................
Admin ......................
Network ......................
unique ID number configuration part number software part number last 20 errors all parameter settings in zipped format operating temperature of hub supply voltage at power connector power duration since first start-up delete all saved errors enter code to access admin mode sensor info: software, configuration, mounting location