FBXXX Field Temperature Blocks
Main Menu
34
5.2.3.1.3 DATE TIME (-R model only)
The DATE TIME menu allows the user to set the format for the date and time. Addi-
tionally, the user sets the date and time for the date and time stamp function.
5.2.3.1.3.1 TIME
The TIME parameter allows the user to set the internal time for the instrument. The
time is tracked using a 24-hour clock. To set the time, press “Enter” and use the arrow
keys to set the time and press “Enter” to accept the selection.
5.2.3.1.3.2 DATE
The DATE parameter allows the user to enter the date for the date/time stamp func-
tion. Press “Enter” to access the parameter. Use the arrow keys to enter the date and
press “Enter” to accept the selection.
5.2.3.1.3.3 REPORT DATES
The REPORT DATES parameter allows the user to select the date format. Use the
left and right arrow keys to choose the date format, mm/dd/yyyy or dd/mm/yyyy, and
press “Enter” to accept the selection.
5.2.3.2 PASSWORD
The PASSWORD (PASSWORD SETUP) menu is used to set the system password or
set the level of protection that conditional engages or disengages protection of certain
groups of parameters.
5.2.3.2.1 USER PASSWORD
The USER PASSWORD parameter allows the users to enter and change the system
and conditional password used to access protected menus. The Password is a number
between one and four digits. Each digit of the password can be a number from 0 to
9. The default System Password is “1234”. If desired, the System Password can be
changed in this menu by using the numeric keys to enter the new password and press-
ing “ENTER”.
5.2.3.2.2 PROTECTION
The PROTECTION parameter is used to enable (HIGH) or disable (LOW) password
protection for the conditional parameters. The password is the same as the system
password. The user has to option to conditionally password protect the Soft Cutout,
Ramp & Soak, and Probe Prog. The user selects to “HIGH” or “LOW” the condi-
tional password using the left and right arrow keys and presses “Enter” to accept the
selection.
To Next Page
Loading...
